View Single Post
Old 05-17-2012, 02:52 AM   #5
joe231
Registered User
 
joe231's Avatar
 
Join Date: Dec 2007
Location: Palmer, Alaska
Posts: 13,821
Re: replacing 87 4 x4 spider gears

You don't need to pull the carrier out to replace the spiders.
Just rotate the carrier to pull the bolt/pin so you can remove the large pin.
Push in on the axles and remove the c-clips (a magnet works well) and slide the axles out (you don't need to pull them completely out of the housing, just enough to clear the spider gears). Then you can just rotate the spiders to remove them (it will make sense once you are at that point).

Good luck!

I've also had excellent results using "the right stuff" and no gasket on the diff cover.
Posted via Mobile Device
__________________
CHEVY ONLY
joe231 is offline   Reply With Quote