Quote:
Originally Posted by BigDan3131
Was that 1600 buck manifold a Hogans sheetmetal one by chance?
|
It was from Extrudabody, $1,650.00.
http://www.extrudabody.com/servlet/t...evy-LS1/Detail
After doing more research, the bore spacing of Weber IDA carbs is 8mm wider than the runner spacing of the Edelbrock Pro Flo intake, so each runner/carb throat would only be off by 4mm. That could easily be fixed when making the carb adapter plates to weld onto the cut-down runners.
The guy in this video is where I found the idea.