|
Re: running wires
I can't show you right now but I can tell you what I did. I can post pictures later when I am off work.
Here is what I am working with:
85 SWB
2002 6.0 dbc
th350
2002 Tahoe Harness/0411 computer
I modified the stock harness to be able to run the computer inside the cab. I mounted the computer where the old ESC computer used to be up under the passenger side of the dash. Then I labeled all the wires on the red/blue connectors and then took all the pins out so that I could route the wires through a hole in the firewall behind the intake. I had to shorten some wires and add some length to others. With the intake installed you can't see the wires coming through the firewall. Next I routed the MAF, ALT, IAC, and TPS wires under the intake and turned the fuel injectors inboard. When Everything is installed you can only see wires at the connections. I am also installing a new wiring harness for the truck and I have all the wires going iside the fenders so they are hidden as well. I also have the fuse blocks and relays for the standalone harness installed under the dash by the computer. I am not 100% one yet but I am close. I can get some updated pictures to give you an idea what it will look like but I still have wires going everywhere at the moment.
|