|
Re: I need some help guys like urgently
Be aware that the fitting in question does NOT seal on the threads, It seals on the nylon gasket between the fitting and the Carb. make sure the gasket it not cracked or split.
Often when removing and re installing the fitting the Carb gets a little dirt through , into the needle and seat.
While the engine is running Lightly and I mean Lightly tap on the front half of the Carb until it stops.If that doesn't work try the following.
Another tip with Carb flooding is to vise grip the suction line down at the fuel pump, Start the engine , Let it run out of fuel until it stalls. Remove the vise grips , restart the engine the quick rush of fuel back into the Carb Usually flushes out the dirt.
Desert
|