Quote:
Originally Posted by RPOZ11
I am having a similar but different issue than you.
I just worked on my truck today.
On my QuadraJet, I used the port above the baseplate, on the lower right hand side (driver's side) of the front of the carb.
I measured with my Vacuum Gauge 0" vacuum pull at idle; 15-20" vacuum pull thru 3500 rpms.
This is the Vacuum Gauge that I use...
(Sorry for such a big image)
|
and its the left side. and is that what you rread when u ran your truck if so you dont have any vac. and need to find out why