The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

BargeCrew · 06-22-2012, 02:35 PM

The timing was set at 8 and later dropped to 6 degrees BTC. The vacuum advance is connected to the manifold port. Idle/mixture screws are set between 1 and 1-1/2 turns from bottom base line. My new valve covers don't have a port for the PCV valve. Do they make a breather for my truck with a built in PCV valve?

06-22-2012, 02:35 PM	#8
BargeCrew Registered User Join Date: May 2011 Location: Seattle, WA. Posts: 7	Re: New parts and nothing to show for it! The timing was set at 8 and later dropped to 6 degrees BTC. The vacuum advance is connected to the manifold port. Idle/mixture screws are set between 1 and 1-1/2 turns from bottom base line. My new valve covers don't have a port for the PCV valve. Do they make a breather for my truck with a built in PCV valve?