The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Prerunner1982 · 09-30-2003, 03:37 PM

nobody makes a lift spindle for our trucks, AIM use too, but no longer, you can get a 3/4" coil spacer for the front (which will lift it 2-3") or you could get lift coils, though both will have an adverse affect on your alignment and steering alignment. for the rear you could get a simple lift block or a shackle flip. let me know if you would like anymore info on this subject i will get you links.

09-30-2003, 03:37 PM	#2
Prerunner1982 Registered User Join Date: Oct 2002 Location: Edmond, OK Posts: 5,904	nobody makes a lift spindle for our trucks, AIM use too, but no longer, you can get a 3/4" coil spacer for the front (which will lift it 2-3") or you could get lift coils, though both will have an adverse affect on your alignment and steering alignment. for the rear you could get a simple lift block or a shackle flip. let me know if you would like anymore info on this subject i will get you links. __________________ Jon 1982 Chevy Silverado 350/th350.... RETIRED 1993 Jeep XJ 2 door(Cherokee) 4wd 4.0ltr/AX-15 (5spd)/NP231 .... Oklahoma Roll Call Last edited by Prerunner1982; 10-01-2003 at 03:28 AM.