The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**COBALT** · 10-01-2003, 01:53 AM

I just use a standard seal puller, or a slide hammer to yank it out.

Be careful you don't scar up the inside of the tail housing with that screw driver. If you do you may never get a new seal to seal correctly.

10-01-2003, 01:53 AM	#3
COBALT Senior Member Join Date: Sep 2001 Location: Seattle, WA, USA Posts: 5,817	I just use a standard seal puller, or a slide hammer to yank it out. Be careful you don't scar up the inside of the tail housing with that screw driver. If you do you may never get a new seal to seal correctly. __________________ '69 3/4 ton C20 2wd-350ci/TH400 '69 3/4 ton Custom 20 2wd-350ci/4sp Manual '99 2wd 5.7 Chevy Tahoe Seattle, WA.