The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

tom hand · 10-01-2003, 02:32 PM

I have put these things in a couple hours while drinking beer. It's harder if you have power steering. I have never loosened anything but the motormounts themselves. Motor only needs to be jacked up just enough to get the mounts out...1/2 inch will usually do it . Install all bolts before you tighten any of them. And I always use locktite.

10-01-2003, 02:32 PM	#5
tom hand CCRider Join Date: Feb 2000 Location: Olive Branch,MS,USA Posts: 2,232	I have put these things in a couple hours while drinking beer. It's harder if you have power steering. I have never loosened anything but the motormounts themselves. Motor only needs to be jacked up just enough to get the mounts out...1/2 inch will usually do it . Install all bolts before you tighten any of them. And I always use locktite. __________________ 72 GMC Sierra SWB almost finished---- 84 Softail Olive Branch MS