Quote:
|
Yea I have the Western Chassis 2.5" drop spindles for '73+. From what I know I need 73+ ball joints and outer tie rods, inner rods and control arm bushings/shafts and everything else would be for '67. The only thing Im not totally sure on is the tie rod adjusting sleeves, I think you can use either?
|
im using and 81 front(spindles, brakes, upper and lower control arms).everything from the pre 73 is just a bit bigger than the post 73. I did replace the u-bolt on the lower control arms and moded the sleeves so they would tighten down on the post 73 outers, but everything else just bolted right in with no real issues