View Single Post
Old 07-09-2012, 06:49 PM   #2
69gmcc10
Registered User
 
69gmcc10's Avatar
 
Join Date: May 2011
Location: Missoula, MT
Posts: 934
Re: stock coil springs

start by cutting 1/2 a coil on the front springs and drive it around a few days to allow the spring to settle and see if you like the height. If you want it lower cut another half off and drive it around again to settle the spring again. I know it sounds like allot of work, but you will get the height you want. On the rear just block it with a 2 inch block, it's cheap and easy.
69gmcc10 is offline   Reply With Quote