1967 chevy truck parts
Knobs and 57" choke cable. *sold*
Nice horn button and parts. *sold*
Ash tray. $10
67 outer handles with pitting, but work good. *sold*
67 inner handles. One knob is loose but still works fine. $25
Heater control with cables. Face is a little loose, no broken arms. $60
Rearview mirror. Arm is nice, mirror head could be replaced, not real nice. *sold*
Vent handles. $10
Hood letters with all nuts and studs intact. Minor pitting. *Sold*
Tail and BU lenses. pretty decent shape for 45 years old. Some overspray on the edges. *sold*
Gauge cluster in nice shape. One small crack on left screw hole. One of the nicer ones i have seen on both sides. $80*SOLD*
Door panels that WERE perfect until one screw stripped out on each one so i had to pull the screws through. Now they will need a little work on the screw hole below the crank holes on each one. These are arm rest delete panels. $35
GM door foil tags. One has tape residue on it but should clean up better. $15
All parts are PLUS shipping. I will try to combine and use flat rate boxes when i can.
The truck also had a very nice original bench seat with no damage that i saw. If someone close is interested let me know ASAP and i will try to get it before the crusher does. Probably about $100 for the seat.
I prefer money orders, but will accept paypal.
__________________
67 gmc custom lwb dakota truck. Sold...And bought back
69 swb 4x4 project (in progress)
70 c-10 lwb texas truck
70 4x4/BB/bkts/posi/tach(retired)
70 swb (wifes)
70 jimmy camper
71 K-5 factory 2wd
71 cheyenne 4x4/tach/posi/ plow rig
71 Cheyenne20 BB, buckets, tach, tilt, 4 speed
72 jimmy CST wyoming rig
72 jimmy Colorado rig
72 lifted texas 4x4 3/4 ton burb
65 fury conv. 383/auto
65 chrysler 300 "L" 413 auto
Last edited by too much stuff; 11-14-2012 at 11:22 PM.
|