[85burb]

Well ended up ordering a set from summit with front end parts for the long bed. Got them installed and it is better now but not perfict. The new crossmember fits now but bearly clears. I am not sure if it is the mount plates or the frame but when i have the mounts bolted to the frame and the plates bolted to the motor the holes on the motor plates are almost a 1/2 inch wider then the holes in the mounts. I have to loosen eveything and start all the bolts and then drop the motor down and tighten all the bolts. I started it and reved the motor and it almost does not move at all. Nice and tight. I guess we will see if it breaks anything.