The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

c-tenkid · 10-05-2003, 02:55 AM

The piece I am referring to is like c channel.I would say it is 2.5 inchs tall.And goes from the front cab mount to the back of the cab.It is so rusted away on both sides I don't know where it is supposed to go.I will look at my 69 tommorow and check it out.

I will also have to call up ECE and talk to them and see if they have it.I am hoping to get the floor done in a couple weeks.I am going to buy a 5 lug disk long bed complete rolling chassis.And put it on that.

I hope this thing turns out nice.I am putting alot of work into it.

It should be worth it though the first time I go

10-05-2003, 02:55 AM	#4
c-tenkid Registered User Join Date: Apr 2003 Location: Festus mo Posts: 370	The piece I am referring to is like c channel.I would say it is 2.5 inchs tall.And goes from the front cab mount to the back of the cab.It is so rusted away on both sides I don't know where it is supposed to go.I will look at my 69 tommorow and check it out. I will also have to call up ECE and talk to them and see if they have it.I am hoping to get the floor done in a couple weeks.I am going to buy a 5 lug disk long bed complete rolling chassis.And put it on that. I hope this thing turns out nice.I am putting alot of work into it. It should be worth it though the first time I go __________________ 69 c-10 lwb,Converted to 4x4,dana 44f,12blt,4 inch lift,vortec headed 355,th350/np203 34x10.50x15 swamper tsl's