The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**swervin ervin** · 10-05-2003, 12:50 PM

The reason I don't have them shaved is they are 64cc heads. My plan, someday, is too build a engine. I plan on flat top pistons for a CR of around 10 to 1. If I shave the heads it will mess up these plans. The GM Goodwrench 350 has some terrible dished pistons in it. That's the plan anyway.

Studs are nice, but I think I'll wait on any of this stuff when/if I build a new engine.

10-05-2003, 12:50 PM	#8
swervin ervin You get what you pay for Join Date: Dec 1999 Location: Cherryville, NC Posts: 4,798	The reason I don't have them shaved is they are 64cc heads. My plan, someday, is too build a engine. I plan on flat top pistons for a CR of around 10 to 1. If I shave the heads it will mess up these plans. The GM Goodwrench 350 has some terrible dished pistons in it. That's the plan anyway. Studs are nice, but I think I'll wait on any of this stuff when/if I build a new engine. __________________ Mike 1985 Chevy C-10