The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

foamypirate · 07-22-2012, 07:09 PM

More progress, harness is finished except for tying into the starter solenoid at the fuseblock for the ECM crank signal wire. Putting a 20 gallon tank on the driver's side, since I use it more frequently. Might convert the passenger to a 20 down the road. New pumps and everything installed and got the TBI dual tank crossover lines on the truck. Just need to get the tanks back in the truck now. Also wired in the ALDL and tied the ECM SES ground into the instrument cluster to use the Choke light as the SES light. VSS is hooked up as well.

07-22-2012, 07:09 PM	#26
foamypirate Registered User Join Date: Apr 2009 Location: Pflugerville, TX Posts: 594	Re: Bought another one! More progress, harness is finished except for tying into the starter solenoid at the fuseblock for the ECM crank signal wire. Putting a 20 gallon tank on the driver's side, since I use it more frequently. Might convert the passenger to a 20 down the road. New pumps and everything installed and got the TBI dual tank crossover lines on the truck. Just need to get the tanks back in the truck now. Also wired in the ALDL and tied the ECM SES ground into the instrument cluster to use the Choke light as the SES light. VSS is hooked up as well.