The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

wilkinst · 07-23-2012, 06:26 PM

I've ordered cab corners and cab supports from them. The cab corners fit about as good as you'd expect from a repo part - not perfect but no serious reshaping needed to be done. The cab supports on the other hand did not work out so well. I had to cut it in the middle and weld in a couple pie shaped pieces because the curve of the support didn't match the curve in the cab floor. For the prices, they can't be beat. I've ordered stuff from LMC and Classic Parts as well; from my experience there's no difference in quality between the three.

my 0.02.

07-23-2012, 06:26 PM	#8
wilkinst Registered User Join Date: Jun 2010 Location: Annapolis, MD Posts: 52	Re: Top Banana sheet metal I've ordered cab corners and cab supports from them. The cab corners fit about as good as you'd expect from a repo part - not perfect but no serious reshaping needed to be done. The cab supports on the other hand did not work out so well. I had to cut it in the middle and weld in a couple pie shaped pieces because the curve of the support didn't match the curve in the cab floor. For the prices, they can't be beat. I've ordered stuff from LMC and Classic Parts as well; from my experience there's no difference in quality between the three. my 0.02.