The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - 1969 k10 lwb to swb, 1 tons, 6.0/4l80e/np205

wade_ab · 07-31-2012, 04:24 PM

more ginding and welding. All the plans for cutting the frame and the support pieces is on here. There is a CAD drawing of it, I forgot whose build-up I read. But long story short, you cut off the extra bed mount, cut out 1 foot from infront od the wheel, and 8 inches from the back. Measure 100 times and tack and measure and tweek and tack and measure and tweek and then weld it front back.

07-31-2012, 04:24 PM	#11
wade_ab Registered User Join Date: Apr 2011 Location: Kountze, Texas Posts: 78	1969 k10 lwb to swb, 1 tons, 6.0/4l80e/np205 more ginding and welding. All the plans for cutting the frame and the support pieces is on here. There is a CAD drawing of it, I forgot whose build-up I read. But long story short, you cut off the extra bed mount, cut out 1 foot from infront od the wheel, and 8 inches from the back. Measure 100 times and tack and measure and tweek and tack and measure and tweek and then weld it front back. Attached Images __________________ 69 k10 - In pieces