The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

spyderbilt · 07-31-2012, 06:35 PM

Good info. Thanks.
I think i will end up building my own motor mounts and try to use the corvette manifolds. Im just concerned with motor mounts and manifolds interfering with my A/C compressor in the stock Vette location.
Any thoughts on moving the motor forward or back for tranny or any other clearances. Ill be using a 4l80e.

Thanks
GS

70' C20 CST.
Posted via Mobile Device

07-31-2012, 06:35 PM	#5
spyderbilt Registered User Join Date: Feb 2011 Location: san antonio texas Posts: 5	Re: Best fit stock exhaust manifold Good info. Thanks. I think i will end up building my own motor mounts and try to use the corvette manifolds. Im just concerned with motor mounts and manifolds interfering with my A/C compressor in the stock Vette location. Any thoughts on moving the motor forward or back for tranny or any other clearances. Ill be using a 4l80e. Thanks GS 70' C20 CST. Posted via Mobile Device