The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**old Rusty C10** · 08-05-2012, 08:49 PM

Anything can be done but im not sure if you would be able to disassemble the columns and switch parts. You could in all likelyhood get the turn signal switch o ut of a 73-82 column and put it in the newer column and swap over the electrical part of the ignition switch if that will also bolt up but at the very least you would have an ugly hole and that large piece on the side of the column which wont look right on your truck... there are tilt columns out there for our trucks you gotta pay for em tho as they are getting rarer

08-05-2012, 08:49 PM	#5
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,345	Re: 76 and 87 interchange steering coulmb? Anything can be done but im not sure if you would be able to disassemble the columns and switch parts. You could in all likelyhood get the turn signal switch o ut of a 73-82 column and put it in the newer column and swap over the electrical part of the ignition switch if that will also bolt up but at the very least you would have an ugly hole and that large piece on the side of the column which wont look right on your truck... there are tilt columns out there for our trucks you gotta pay for em tho as they are getting rarer __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!