The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

clinebarger · 08-07-2012, 08:34 PM

Have you checked for spark?
Power to the "batt" terminal on the distributor?
Valves set to tight = no compression.

For future reference....Once you align the timing dot's together....Turn the crank one revolution....Both timing dot's will be straight up, This is TDC for #1 piston.

08-07-2012, 08:34 PM	#2
clinebarger Senior Member Join Date: May 2009 Location: Fort Worth, TX Posts: 6,370	Re: Help /advice needed ! Have you checked for spark? Power to the "batt" terminal on the distributor? Valves set to tight = no compression. For future reference....Once you align the timing dot's together....Turn the crank one revolution....Both timing dot's will be straight up, This is TDC for #1 piston.