[big_al_71]

Originally Posted by suspect

hey Big Al......on your rear bag set up, are you using plates mounted under & over your bags? or are your bags mounted right onto the trailing arm and frame?
also, when your aired out, does your axle rest on the bump stops inside the c notch? does your differential touch the underside of your bed floor?

thanks

Yes they are mounted on plates. The differential does not hit the bed floor and it is about an inch away. The axle tubes go into the notch but do not sit on the bumps because the bedsides hit the tires in the rear as the backspace I chosed is 1/2 off intead of 5 1/2 I went with a 5bs since I am going to modify the bedsides anyways I wanted the wheel as close to the edge as possible. I am posting some picts of the set up.

Originally Posted by ZUBZ

Big Al - your truck is super sweet man. Perfect just the type of pictures I am after.

Please can you expand on the following items, I am new to air so please bear with me....

1. Small cnotch from CPP
2. tubular control arms uppers and lowers

Thanks
Z

Z here are links to the parts I used.

http://www.classicperform.com/tech_a...ch/c-notch.htm

http://www.ridetech.com/store/trucks...hash=V259.V328

Thanks for the compliment!!!