Quote:
Originally Posted by ksbrktracer
Has anyone done a flip kit on one of these....? Does it have to be notched....?
|
Quote:
Originally Posted by bagged74
If you do a flip kit you will want a notch.
|
Quote:
Originally Posted by Hertzdaddy
X2
|
Quote:
Originally Posted by made2drag
X3.....no way around it.
|
Quote:
Originally Posted by BaggedRanger
x4 and I can vouch for the rear shocks sucking after a flip kit..
|
I made my own flip kit using another pair of universal spring perches welded to the axle tubes and I am NOT running a C-notch kit and I have yet to have the axle tubes touch the frame. I don't even have bump stops. During my 2wd conversion I placed the rear hangers 4" further back than stock to allow me to use 56" long springs from a 3/4 ton (with a few leafs removed), stock Blazers have 52" length springs.
I am not saying a C-notch kit isn't a good idea, but it might not be required.