Quote:
Originally Posted by TheApocalyptican
Wanted to come back to this with info for anyone with this problem in the future. Obviously the best would be to measure what you have that fits, and not believe the websites. This goes for more than radiators too. There's just too many different options available for parts....so it's best to get all the info on what you need vs what is being sold.
As far as these radiators themselves....the 730 is a 2 row rad. The others they list for our trucks are only 1 row. This makes the core size thicker, and makes the header size bigger too. The header is the actual area that is used for mounting in our trucks, which makes the header size VERY important. Looks to me like all the 1 row 19" headers are very close in size to where you can interchange them without doing anything to the mounts. Also the same for the 1 row 17". Which only leaves the 2 row 19", which is the 730, which kikkegek has. The solution for his radiator, and I apologize for not noticing this before kikkegek, is that this rad is meant to go in place of the thicker stock rads that are available. Basically, you need the bigger rad mounting bracket that is a single piece that goes over the support and the rad.
|
dont worry man!
thanks for getting back to me and letting me know.
the modded (not pretty) supports and rubbers have been holding up for over a year now and doing fine. problem is that a rather inexpensive part becomes expensive by the time it reaches the Netherlands where I live.
So I'll keep it in mind and maybe upgrade in the future...
thanks man!
this solves my question on the top part....but which supports/rubbers should I use on the bottom?