|
Re: 79 1/2 ton, 4x4, low milage build
Right innerfender. Rust cut out and patch tacked in. Some compound curves so took some time to get to the correct shape.
The jacking instructions sticker goes across one of the curves. Where there is a valley some debris got in there and caused some surface rust underneath the sticker. Not yet sure of my solution here as I would like to keep the sticker. I cut along the black dividing line and was able to clean out underneath so I may just proceed that way and seal it back up when done.
__________________
The lid is stuck on my jar of anti seize
|