|
Re: Have some questions..
I'm going to take the intake off tonight and see if the bosses are under the plate in the casting to be able to run them but they are not in the top of the plate like normal.
As I was following the instructions to rework the harness I pulled some pins for the 02's, they are 4 write and it only had me pull 2 of them, I wrapped up the wires and did not cut because I was not 100% sure.
I'm going to see if the truck I got the harness from still has it in there, if not I can sure put that one to use.
Posted via Mobile Device
|