[jonzcustomshop]

getting the front bolted up, using new 7/16 grade 8 bolts.

lots of measuring to find center, and get the front mounts in the right spot.

the rear are a little easier, found a factory hole that is in the right sopt, and the same place on both sides.

will have to chop a 2 inch hole in the frame rail with a hole saw, and then on the bottom front there is a spot of the frame rail that has to be straightened out on both sides (where the factory e brake comes through), I am thinking a little heat , and a bit of work with a sledge will do the trick.