[blazinzuk]

If your not going to trim your fenders it would behoove you to move the front axle forward some.

Without trimming I would say a 12" spring, longer shackles, zero rate ( or ez inch) in the front. Out back something to match, then a 3" body lift, you still might rub a little bit.

But there are tons of ways to do this. 12" springs ride like a brick, those springs posted above make a brick look like a cushy pillow. The don't have much movement at all.

The best way here I think is to get a B-52 kit from DIY 4x, then some custom deavers, you should be able to get about 15" of lift out of a decent riding spring and the longer spring will help the ride. Even with that you will probably still need the body lift.

Don't forget steering. Crossover steering is best at those nosebleed heights