|
Re: how much lift to clear 46s?
its gana take some axle work up front to get that pinion angle right and you will still overheat your u joints
cutting the weld on the inner c's and clocking them to get the caster right and building the front spring hanger lower then the shackle so you dont have to wedge it so much
the rear is easer just cut the perches off and weld on new ones
i would see if you can get a driveshaft made with cv joints for the front
__________________
88 gmc v3500 bonus cab classy chassy conversion, 454, nv4500, np205, dana 60 front with spool, 14 bolt ff cac rear with locker.
|