Quote:
Originally Posted by duallyjams
Do you still have the build sheet for this to show what bearing , wheel stud that you chose also this package on moser site comes with brakes and the moser site shows 63-69 and the 70-72 as different width.
|
No i don't have the build sheet. I did not purchase this directly. The wheel studs are 7/16 by 1-1/4". The do not come standard with brakes,but can be ordered that way. I do have drum brakes for it that have been sitting out and will need some freshening up. The wheel studs are 4 on 4.75 which i thought was strange that this was ordered like that,but then i checked the front disk setup with tubular control arms and it was also 4 on 4.75,so im guessing that this was ordered that way for a reason. The bearings would be moser or timkin ball bearing type according to moser tech support. They do not use cheap bearings. It also has the c-clip eliminator type on it. The housing itself is 60.5" long and outside to outside on the axles without counting the studs is 65.5"