The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

ChevLoRay · 09-03-2012, 01:58 PM

If the window winder is floppy, then there is wear within the mechanism. If the handle and shaft are tight, then it probably just needs cleaned and lubed....meaning the guides and slides. If any of the guides/rollers are broken, you'll need to replace them.

But, they're not expensive and not hard to get to so you can replace them.

09-03-2012, 01:58 PM	#5
ChevLoRay Old Skool Club Join Date: Jun 2001 Location: Benton, AR "The Heart of Arkansas" Posts: 10,880	Re: Driver window just stopped If the window winder is floppy, then there is wear within the mechanism. If the handle and shaft are tight, then it probably just needs cleaned and lubed....meaning the guides and slides. If any of the guides/rollers are broken, you'll need to replace them. But, they're not expensive and not hard to get to so you can replace them. __________________ Member Nr. 2770 '96 GMC Sportside; 4.3/SLT - Daily driven....constantly needs washed. '69 C-10 SWB; 350/TH400 - in limbo The older I get, the better I was.