[midniteblues]

no need too take the whole thing out or even dissconnect the ing harness.
use a small pin or stiff wire insert it in the little hole next too the key with the key in the ing. push on the lil' pin while turning the key to the ass. position the cly should come out

often these can be a pretty tricky some times they come out easy
when inserting the pin/needle or wire you should feel a very little spring plunger once again it can be tricky

on my 67 I noticed i had too turn the key too the ass.pos and insert the pin it didnt line up in the off pos. and also I had to clamp a small vise grip on the key to give some leverage to be able too turn it too ass.(maybe because my hands are all but useless) but anyway once you find that little plunger through the hole just turn it too ass. it should pop out.