The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Marv D · 09-11-2012, 11:02 PM

She is making noise. Have a ADRA race friday night

Truck is ready!!!
If Rich doesn't tech I'll go off the stop again and see if the machnist 'trick' valve job helps or hurts LO. Has just a touch more compression (from milling the heads now 13.7 instead of 13.5). Because I'm not spinning it up and the convertor is a bit tight,, I put 1.5 more degrees advance in the cam this time.

Now just have to make 3 races and it will be Dune season again.

09-11-2012, 11:02 PM	#5
Marv D Registered Truck Offender Join Date: May 2008 Location: hells training ground (aka Ariz) Posts: 3,118	Re: Almost back together She is making noise. Have a ADRA race friday night Truck is ready!!! If Rich doesn't tech I'll go off the stop again and see if the machnist 'trick' valve job helps or hurts LO. Has just a touch more compression (from milling the heads now 13.7 instead of 13.5). Because I'm not spinning it up and the convertor is a bit tight,, I put 1.5 more degrees advance in the cam this time. Now just have to make 3 races and it will be Dune season again. __________________ Still playin with trucks, even at my age! When you're dead, it's only a problem for the people around you, because you don't know you're dead. .....It's kinda the same when your STUPID. I just did my taxes and reviewed my SS statement. Thanks to the current administration it looks like I will only have to work till noon on the day of my funeral.