The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

GuyO · 09-12-2012, 12:11 AM

I think Dave PL is right. I had similar problems - first thing I did was replace the sender to no avail. Then I started at the farthest away from the cluster and removed any teflon, then I found that the green wire had a bare spot for a possible short. Also, I moved the sender to the head and not the intake (not Lt1), finally I sent a private message to VetteVet and he recommended I add a ground from the cluster to the dash. Everything works now.

09-12-2012, 12:11 AM	#3
GuyO Registered User Join Date: Nov 2011 Location: Kirkland, WA Posts: 343	Re: Tempture gauge isn't working I think Dave PL is right. I had similar problems - first thing I did was replace the sender to no avail. Then I started at the farthest away from the cluster and removed any teflon, then I found that the green wire had a bare spot for a possible short. Also, I moved the sender to the head and not the intake (not Lt1), finally I sent a private message to VetteVet and he recommended I add a ground from the cluster to the dash. Everything works now.