|
Re: How to: Ruin a perfectly good C10
Looks good..interesting about the pinion angle. My truck got worse with the TA mount flip...my trucks pinion angle is like (yes shims are on the way) 8*? After working to set a better angle from the eng/trans my d-shaft was too short...then he put on the wrong u-joint....my d-shaft is getting it re-redone 
__________________
Kurt -
'68 GMC short step - NIB '09 LY6 6.0L crate motor w/mods, NIB '12 crate 4L85e w/billet 3k stall Circle D, 3.73 posi 12 bolt, DynaTech f-swap headers, 3/4 drop, handling mods, etc. - my toy
'72 Chevy LWB C-10 Highlander - 350/350 ps/pb/tilt/ac - not original but close
'06 Chevy TrailBlazerSS - LS2/4L70e - little black hot rod SUV - my DD
'18 Kia Sorento - wife's econo-driver
'95 Chevy S10 - reg cab shortbed, LS, 4.3, auto...
my '68's powertrain and chassis build -links broken
A surprise phase - carb to efi -links broken
|