The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

LeRoy · 10-13-2003, 06:24 AM

What about the rear 3/4 ton trailing arms. Seems that the u-bolt holes would be larger for the bigger diameter of the Dana 60, Corp. or whatever resides compared to a standard 12 bolt 1/2 ton rearend. I can check it out as I've got a set of both sitting around. Just a though. I do know that they are the same width at the attachment point on the crossmember

10-13-2003, 06:24 AM	#3
LeRoy Registered truck nut Join Date: Dec 1999 Location: Mt. Vernon, Washington, USA Posts: 1,584	What about the rear 3/4 ton trailing arms. Seems that the u-bolt holes would be larger for the bigger diameter of the Dana 60, Corp. or whatever resides compared to a standard 12 bolt 1/2 ton rearend. I can check it out as I've got a set of both sitting around. Just a though. I do know that they are the same width at the attachment point on the crossmember __________________ MOUNT VERNON, WASH. STATE Need a part? Just PM me