The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Bearings, King Pins, and Master Cylinders Oh My.....

Gator Alum · 09-20-2012, 10:42 AM

So speedway's site has incorrect information. The pins are really .866, NOT .875... Should be interesting to see how the machine shop is going to handle this one...

I just had the axle sandblasted and I sprayed it Rustoleum Black. Waiting for it to dry and then off to machining. It's the most humid, cloudy day in Florida so it's taking a while to dry. It's usually so blazing hot it takes 5 min.

09-20-2012, 10:42 AM	#19
Gator Alum Registered User Join Date: Jan 2012 Location: St. Petersburg, FL Posts: 104	Re: Bearings, King Pins, and Master Cylinders Oh My..... So speedway's site has incorrect information. The pins are really .866, NOT .875... Should be interesting to see how the machine shop is going to handle this one... I just had the axle sandblasted and I sprayed it Rustoleum Black. Waiting for it to dry and then off to machining. It's the most humid, cloudy day in Florida so it's taking a while to dry. It's usually so blazing hot it takes 5 min.