|
Re: Poor quality items from LMC
I did post up pics of how there window rollers are sized wrong and how to grind off the old roller pins and weld your stock pin back into place with the new roller, but a door seal is a hard thing to show.. Look at the door the gaps are very good but the rear of the door is out, that is due to the LMC seal being either too dense or molded wrong .. It is hitting too hard up front , sure move the door out ok then it will double l;atch on the striker and be out a mile.. a pic can show some things other things not as well..
LMC is not going to change.. for them its a price point plain and simple..
My hood springs came from another vendor.. its all the same supplier and they are not as strong as the OEM ones. For me its off to the pick a part to find a better set.. I plan on using a cheap fish scale to get a basic reading from my old ones and the new ones ( I will post that up) and finding something that is a harder pull for a given length.
|