|
Re: Convert to 4 core Radiator, What's Involved?
The lower mounts from my 2 row were closer together than the 4 row replacement.The top bolt holes are there.Line them up and look.If they line up top and bottom .and the 4 row rubbers fit you're good to go.If not the lower mounts are available thru BB vendors and take just a bit of clearancing and bolt in.You'll need to remove the old ones.The big question to figure it out is,"What radiator are you replacing?"This was on a 2wd but should be the same.I have a 250 and the shroud (really just a finger guard) is the same for all of them.
__________________
The 47-present Chevrolet and GMC Truck Message Board Network,it's owners,moderators,members,and associates of any type should not be held responsible for my opinion.
You can't fix stupid,not even with duct tape.
"My appearance is due to the fact that "GOD" does punish you for having too much fun!"
Barrett-Jackson has perfected alchemy,they make rust into gold!
"You can lead a horse to water but you can't saddle a duck"
"Cleverly disguised as a 'Responsible Adult'
"Sometimes your Knight in shining armor is just a retard in tinfoil"
|