The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Convert to 4 core Radiator, What's Involved?

gotchamel · 09-21-2012, 02:21 PM

I just did this project.I did have to change out upper/lower mounts and rubbers.The new lower mounts had to be thrubolted,factory were rivets.A small amount of grinding on the core support was needed to accept the new mounts.This was a 2wd c10,that may be the difference.Shroud was good to go after making some 1/2"spacers.

09-21-2012, 02:21 PM	#6
gotchamel Registered User Join Date: Feb 2011 Location: islamorada fl. Posts: 466	Re: Convert to 4 core Radiator, What's Involved? I just did this project.I did have to change out upper/lower mounts and rubbers.The new lower mounts had to be thrubolted,factory were rivets.A small amount of grinding on the core support was needed to accept the new mounts.This was a 2wd c10,that may be the difference.Shroud was good to go after making some 1/2"spacers.