The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Project#2 67-72 Restoration's Shop truck

VA72C10 · 09-22-2012, 09:06 PM

Above you also see the tools I used to cut out the siezed frame mount bolt for the panhard rod. Got that out and the upper shock mounts. Rear is ready to remove once I get the upper spring bolts out or cut...

Here's the windshield frame before install....need to get better pics of the windshield in the daylight tomorrow. Will try to post one later.

And the grinding tools I used....$45 total investment and each has a specific purpose...easy to switch the cord...or use a splitter and have all hooked up...

Saves time and saves the tools as you switch from one to the other instead of continuous use...
Posted via Mobile Device

09-22-2012, 09:06 PM	#155
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Project#2 67-72 Restoration's Shop truck Above you also see the tools I used to cut out the siezed frame mount bolt for the panhard rod. Got that out and the upper shock mounts. Rear is ready to remove once I get the upper spring bolts out or cut... Here's the windshield frame before install....need to get better pics of the windshield in the daylight tomorrow. Will try to post one later. And the grinding tools I used....$45 total investment and each has a specific purpose...easy to switch the cord...or use a splitter and have all hooked up... Saves time and saves the tools as you switch from one to the other instead of continuous use... Posted via Mobile Device Attached Images __________________ Looking for a 67-72 swb or blazer project in or around VA.