[69GWC]

I would take off everything that will un-bolt , was everything down real well before you sand to get rid of any oils (I like to use dawn dish soap) .
Then sand everything down really well as you don't want anything shining when done (as in no shine to the paint anymore) then use a tack rag to remove all the dust. Then prime with 2 light coats then once that's dry paint with a few light coats of color makeing sure you keep the covarge even so you end up with no streaks (overlap you last pass with your next pass) and make sure you don't put in on thick, you don't want it to look dry but not to wet as you lay the paint down so it does not run as a big run will suck.
Iam no painter but that has work for me in the past.
Posted via Mobile Device