Quote:
Originally Posted by dcramos72
Yes, bench bleed the MC before installing. Filled to 1/4" below edge and bleed till the fluid was about half way down in each cylinder.
Brake pedal rod long enough? You mean rod coming out back of booster? Currently brake pedal is in its original position when completely out.
Posted via Mobile Device
|
Did your kit have a plug (spacer) to put into the hollow end of the mc piston? This hollow may be in the mc piston where booster rod fits--some mc's are hollow here & require that plug for a spacer; other mc's are 'blunt' at this piston surface & do not need the spacer.