Re: my '64 c-10 swb project with steel floor from a '70
well i guess i have another excuse, i have a 9yr. old girl in cali from an old girlfriend! long story short i have temp. custody as of today and she will be leaving cali to come stay with me by no later then this weekend and as early as tomorrow via my cousin is coming out there to see her dad and will be leavin tomorrow but not later then this weekend!! i hope!! my daughter is at my sisters house in cali as of now and will stay there until my cousin heads this way!!
i do have a small update i got my driver side rocker on almost all the way!! an my driver side floor patches done! my cousin left a battery on my truck floor and it ate my floor up pretty bad in the last yr. or so, so i bought some patches for it and made the two blue pieces and tacked them in, they i did a BIG NO-NO!! my uncle knows how to weld but built up the welds to much now i have to grind a bunch off the kick panel the rest i did and was ok!! i learned a lesson this weekend!! i left to go get some parts for my daily driver and told him ya, you can do a lil welding he said he was bored and wanted to do some welding since i was having to leave an get parts, never again, i repeat never again!! he only welded the kick panel in, the rockers are preowned but never installed and had the lip bend on them so i got them for 40 for the pair!!
this is what i have been doing the last two weekends but had to wait til they were almost done, all thats left is to spot weld the bottom lip and i will be done, the passenger side is good, i just got to replace the rocker!!
|