[skymangs]

The C10 pedal assembly was a lot of work, but in the end I think I'd choose it for my next project. Wound up cutting off the firewall plate and making a new one. Then cutting off all the bracket that bolts to the C10 dash and making a 14 gauge bracket that bolts to the bottom of my dash. I also had to cut the actuator rod (it was too short) and splice a piece of the C10 rod in. The C10 rod is adjustable which is kind of nice. Then noticed that the S10 rod was considerably higher than the C10 was. Had to diss-assemble the pedal assembly to drill a new hole above the stock one.

Here's some pics.