The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**DURG** · 10-08-2012, 08:16 PM

Got the truck turned around and I put a 327 small block and turbo 350 tranny in for mockup. I have a ton of room between the pan and crossmember and also between the balancer and rack. even an 8" balancer could go down an inch. I talked to Dave at Porterbuilt and they are going to try and hook me up with a different set of truss plates to lower the motor 3/4". That will keep the bottom of my oil pan sump even with the bottom of the crossmember.

10-08-2012, 08:16 PM	#120
DURG Registered User Join Date: May 2012 Location: Scarborough ME. Posts: 413	Re: DURG's Black 65 C10 Got the truck turned around and I put a 327 small block and turbo 350 tranny in for mockup. I have a ton of room between the pan and crossmember and also between the balancer and rack. even an 8" balancer could go down an inch. I talked to Dave at Porterbuilt and they are going to try and hook me up with a different set of truss plates to lower the motor 3/4". That will keep the bottom of my oil pan sump even with the bottom of the crossmember. __________________ 1962 Impala SS 383 stroker Tremec TKO 600 Black 1965 SWB BBW Fleetside Custom Cab PB Coilover setup Black 2003 100th Anniversary Road King Classic Silver Black