Re: Project "Sweet 16"
99, here's the pics of the engine you requested. I mocked up the radiator when I originally decided to angle the core support. Looks like I'll have about 5" between the rad and the water pump pully. should be plenty of room for a puller fan. Radiator will get replaced with an aluminum 3 row here shortly. Second pic shows the clearance on the steering shaft. When the column is in, it's 1.25" from the manifold. Third pic is the pass. Exhaust manifold. Only has 1/4" between the bottom of the manifold and the rear of the upper A Arm. Might clearance the arm just a smidge, just to be safe!
|