The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - 1969 dual MC in a '65 c10

Woogeroo · 10-21-2012, 01:50 PM

Howdy folks.

I have a 1965 c10, but it has a 1969 dual pot, power brake master cylinder on it.

Below is a photo of my brake rod that connects from the brake pedal to the MC assembly.

This brake pedal push rod is from a 1965 Chevrolet C10 pickup(at least, that is what it came off of) is 8 5/8 inches long from the round end to the threaded end.

7/16 - 20 thread.

more pics, here

My question is this... is there a '67-'72 brake pedal rod that is longer, but will fit in the same place?

A lot of stuff on my truck is from different years, etc..

Thanks a bunch for any information.

-W

10-21-2012, 01:50 PM	#1
Woogeroo Registered User Join Date: Aug 2003 Location: tool box Posts: 3,115	1969 dual MC in a '65 c10 - brake rod length questions Howdy folks. I have a 1965 c10, but it has a 1969 dual pot, power brake master cylinder on it. Below is a photo of my brake rod that connects from the brake pedal to the MC assembly. This brake pedal push rod is from a 1965 Chevrolet C10 pickup(at least, that is what it came off of) is 8 5/8 inches long from the round end to the threaded end. 7/16 - 20 thread. more pics, here My question is this... is there a '67-'72 brake pedal rod that is longer, but will fit in the same place? A lot of stuff on my truck is from different years, etc.. Thanks a bunch for any information. -W Attached Images Last edited by Woogeroo; 10-21-2012 at 01:57 PM.