Re: No Limit Wide-Ride C10 IFS 63-87
An overall shot shows the angles, the top is 28*, and the lower is 15*. A slight notch, approx 1/4" deep, is needed in the frame rail top to help with steering shaft clearance. In other installs, I moved the floor mount position for the column down 1/2", and over (toward the motor) 3/8" from the stock location. This change helps the column to fit the seat better, and adds to steering clearance. We use 30" columns on C10's here. This is a IDIDIT column. I like to use the universal type, not the 'direct fit' columns. If you want a column shift, still use a 30" column. Try a Kugal shift linkage kit for the link to the trans.
__________________
GoodGuys 2012 Pro-Truck Champion
2012 Truckin' Throwdown Champion
GoodGuys 2011 National Champion
2011 Truckin' Throwdown Champion
GoodGuys 2010 National Champion
Proud to put our products up against all others!
Last edited by robnolimit; 10-24-2012 at 09:27 PM.
|