The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

classicundercar · 10-30-2012, 12:46 PM

not to mention you need a 1 1/8 socket (with a relatively thin wall) to pull the yoke which not everyone has in their box. just did my rear seal, I'm lucky enough to have the 1 5/16 to pull that one.

that and just removing that front shaft from the tcase can be a PITA on a 205.

$96 would be a good price around here. seems like labor at most shops is $79+ / hr.

10-30-2012, 12:46 PM	#15
classicundercar Registered User Join Date: Apr 2009 Location: SS, MD Posts: 62	Re: NP 205 question not to mention you need a 1 1/8 socket (with a relatively thin wall) to pull the yoke which not everyone has in their box. just did my rear seal, I'm lucky enough to have the 1 5/16 to pull that one. that and just removing that front shaft from the tcase can be a PITA on a 205. $96 would be a good price around here. seems like labor at most shops is $79+ / hr. __________________ Current: 1971 K10 lwb Past: 1972 c10 lwb 1969 c10 swb 1977 c10 lwb more old jeeps than I want to remember!